Diesel Engine
Diesel Generator
Diesel Water Pump
Sprocket Series
Crankshaft Series
RIM Series
OIL Pump Series
Clutch Durm Series
Chain Adjuster Series
Clutch Series
Spare Parts Series
Harvester RIM Series
Trimmer Heads
Starters
Brush Cutter Parts Blade Series
Flywheel & Ignition Coil
Muffler
Fuel Tank
Cylinder & Piston Assy
Harvester Saw teeth
SITE SEARCH
Your present location;NewsCompany News
The working principle of oil pump
  Release time:2018/8/2   Form:Zhejiang ChaoHong Machinery Co.,LTD.   Hots:127
The characteristics of the gear oil pump is reliable, simple structure, easy fabrication and pump oil pressure is higher, so widely used.

When the engine is working, the camshaft drive gear on the oil pump drive gear, with motivation to make fixed on the driving gear shaft of the driving gear rotation, thus promote driven gear to rotate in the opposite direction, to pump the oil from the oil inlet cavity along the tooth gap and wall to the oil chamber. In this way, the oil cavity formation, low pressure produced by suction within the oil sump oil suction inlet chamber. Due to the main, driven gear rotating unceasingly, the oil is constantly under pressure to needed parts.
Close